1460 County Rd. 5
Golden Valley, ND  58541

Shane: 701-983-4573 - Lic. #326
 

 

Home  |  Auctions  |  Special Consignments  |  About Us  |  Contact  |  Online Auctions | Sold (Auction Results)

 

Auction Sale!!!


Large Industrial Auction
Saturday
, October 14, 2017 8:00 MT
Major Equipment (Proxibid) will sell at Noon
220 W. Railroad St. (W. Main) Halliday, ND
Seller: J.OB's Specialties John O'Brien (701) 290-4076

There will be 2 rings going! Please use West entrance of Halliday

Online bidding available through Proxibid at 4% Buyer's Premium  http://www.proxibid.com/wolffauctioneers
Large Retirement Auction - Items Are Numerous

Wheel Loader & Accessories, Backhoes:
  • 2010 Case 721 E XT (Tool Carrier) Wheel loader, Net H.P. 183/ Gross H.P. 195, Cooling System w/Reversing Fan, Limited Slip Differentials, Cold weather pkg., Enclosed cab w/heat/AC, Cloth Air ride seat, Wide Finders w/RH/LH steps, Ride Control, 3rd Spool Valve, Heavy Counterweight, Hydraulic Quick Coupler, 1297 Hrs., SN: NAF2088859, rear rubber: 20-5R25 @ 75%, w/ WB 3yd bucket, well maintained.  Click here for Spec Sheet
  • 2009 410 J Backhoe 1757 Hrs., Extenda-Hoe, SN:T0410JX176379, C.A.H., Air Seat, 21LX24 Rear Rubber, 1 @ 95% & 1 @ 60%, 12.5/80-18 Front Rubber @ 60% 12 ply, Pilot Controller, 30" Hoe Bucket, 1.5 yd Loader Bucket, 1450 lbs Front wts., Front Coupler, Ride Control, Radio-CD, Low Noise pkg., Starting Aid, Clean & Well Maintained. For More Addt'l Info. Contact Joe @ (701) 570-6357.
  • JD 310 SE Backhoe, turbo 4x4, Hrs. meter not working, extend-a-hoe, 90” loader bucket, 24” hoe bucket, rubber @ 50%, swing cylinders need repair and bushings on hoe bucket should be replaced, runs great, SN:T0310SE885206
  • WB Fork Assembly, 13,000 lbs., model: Case 621
  • Pemberton Inc. Stinger, model: 621/520/111

Crane & Forklift

  • 1977 Bantam by Koering 30 ton Crane, Model: T-788, Detroit Eng. - needs work
  • Allis Chalmers ACP 140L Forklift, LP, N/A Hrs., 15,000 lb. mast, brake pedal sticks, runs good

Vehicles:

  • 2014 Silverado Chev. 3500 HD Service Truck, 6.0L gas Eng., 4x4, white, reg. cab, 58,159mi, power window/lock, alum. Grill guard, nerf bars, W/ 8ft. Knapheid KUV service box
  • 2009 Dodge 3500 Quad cab Pick-up, 4x4, 6.7L diesel Eng., dually, long box, blue, 99,000 mi, power window/lock, B&W ball hitch, good rubber, new rear end in 2017
  • 2007 Chev. G-3500 Express Pick-up, 2 wd, 237,000 mi, grill guard, W/ 10.5ft Knapheid utility box
  • 1993 GMC Vandura 2500 Sport Van, 138,243 mi

Restored Classic Cars:

  • 1965 Chevy Impala SS Super Sport, 327 eng - not original, 93,832 mi
  • 1970 Ford Mustang Mach 1, 351 Windsor eng., 70,040 mi

Trucks:

  • 1999 Kenworth Truck, model: T800, 734,314 mi., Cummins M11Plus engine, 10 spd. Trans., good rubber, runs good, W/ Tulsa winch and tail roll
  • 1990 Ford L9000 Convention Truck, 131,400 mi, diesel Cummins Eng. 4 speed w/2 speed trans. W/overdrive, tandem dual axles - Includes 1995 JLG 15 ton crane, certified 2yrs ago
  • 1986 Ford F-800 Boom Truck, single ax duals, 109,750 mi, 5sp w/ 2sp, w/8 ton Nat’l 300-B hoist- good
  • 1981 IH Sundance 1800 Dump Truck, 135,950 mi, IH 427 gas Eng., single ax duals, pintle hitch, runs good, w/15.5ft fold down side box
  • 1974 Int. Transtar 4300 F-4370 Winch Truck, Cummins Eng.- (only 70 Hrs. on rebuilt), 389,806 mi, 2 winches, 1 @ 80,000 lbs. - both good, no title
  • Chev C-60 Truck Frame, Chev 427 Eng. - good engine, w/Conoco bulk tank
  • 1998 Peterbilt 379 Extended Hood Semi, 1,700,000 mi, 3406E CAT Eng., 65,000 mi. on rebuilt, 18 spd., 60" Sleeper, Aluminum Grill Guard, Wet Line & Hyd.-Cooler, Runs Good. For Addt'l Info. Contact Allan @ (701) 690-0364.

Trailers:

  • 2012 ABU Flatbed Trailer, 82” x 16’ w/2ft dove tail and ramps, metal, dbl ax, good rubber
  • 2009 Manac 34ft Side Dump Trailer, model: SSD42, newer Aero sidekick roll tarp, hyd. controls, good rubber
  • 2007 ABU 5th Wheel Flatbed Trailer, metal, 96” x 36’ w/ramps - ฎside spring needs replacing on ramp, tandem, dbl ax, ____ lbs. winch, battery operated hyd. jacks
  • 2005 United Express Enclosed 5th Wheel Trailer, 8’ x 28’, dbl ax, back dbl doors & side door, w/ Single phase generator, 120/240 V, model: TP9000LXU
  • 2005 Transport DLX Haulmark enclosed trailer, 8’ x 20’, dbl ax, aluminum, ramp back door, new tires
  • 1999 Great Dane 45ft Van Trailer, model:714TP, w/Tommy-Lift (needs battery) good rubber
  • 1999 Doonan Lowboy Flatbed Semi Trailer, 8’ x 54’, dbl ax, tandem, w/tail roll
  • 2000 Aluminum slide-on 26ft Boat Trailer, triple ax
  • Shop built 5th Wheel Dolly, dbl. ax, good tires, well built - good
  • Shop built dbl ax Trailer w/1000 gal tank, good tires, nice condt.
  • B&W Companion 5th Wheel Hitch - good

Lawnmower:
• Cub Cadet 50” Zero Turn Lawn Mower, 276 Hrs. model: 2350RZ - runs good

Welders, Generators, Plasma Cutters:

  • Miller XMT 350 CC/CV Inverter welder, single phase or 3 phase, w/ aluminum spool gun, leads for stick welding and tig rig
  • Tahoe 7000 TI7000 LXR Generator - New
  • Briggs & Stratton Elite Portable Generator, 800 watt
  • Hobart Champion Elite welder, 305 Hrs.
  • Hobart Handler 135 welder
  • 11,000 watt generator, 225 amp., AC/DC welder
  • Hobart 625 Plasma Cutter, needs new tips and nozzle
  • Cut-60 Plasma Cutter
  • Acetyl Torch Set
  • Miller S-52-E Constant Speed Wire Feeder
  • Assortment of welding consumables: flux, rods: 7018 & 610, stainless etc.
  • Phoenix Rod Oven
  • Miller Trailblazer 250G Welder - for parts
  • Panel Spotter Spot Welder, model C-3000

Concrete Equipment:

  • Concrete Saw, model CX-3, works well
  • (2) Husqvarna Hand Held 14”cement saw, models: K750 & K760
  • Fresno 48” Finishing Float, w/ 4 ft Bull float & 35 ft pole
  • MBW GP 3550 Ground Pounder, Honda 160 motor
  • MBW Ground Pounder, model R422, w/Honda GX100 motor- needs carburetor work
  • MBW Power Trowel, 4 blades, 36”
  • Black Beauty Power Screed w/14ft bar
  • Curb Roller, model CR1709 - used only 20 Hrs.
  • (10) Insulated Concrete Blankets
  • Many More Concrete Equipment/Tools

Shop Equipment & Tools:

  • Bishman Command Tire Machine, model 888A  OUT
  • Alkota Pressure Washer, model 430, on stand, 2yrs old  OUT
  • Landa Gold Series Comm. Pressure Washer, VHW-2-110 - work good
  • 2013 Sullair 49 H.P. 185 Portable Air Compressor, 342 Hrs. - very good
  • Le Roi Dresser Portable Air Compressor, Eng. good, compressor is not
  • Senco Portable Air Compressor
  • Dewalt Portable Air Compressor
  • Tahoe Portable Pressure Washer, 2700 PSI, Honda motor
  • Elec. Winch, 12 V, 6,000 lbs. capacity
  • (2) Foldable Engine Hoists, model EH-2FB, 2 Ton
  • (3) Hyd. Floor Jacks, 2-3 Ton
  • (2) Air Jacks, 22 Ton
  • (4) Jack Stands
  • (2) Mr. Heater 125,000 BTU Space Heaters
  • Mr. Heater 125,000 BTU Space Heater for parts
  • Hitachi Jobsite Air Compressor, Honda GX160 motor
  • Ash Vac
  • Assortment of Shop Vacs
  • David White Laser Level
  • Assortment of Air Nailers & Staplers
  • Stair Climbing Dolly - good
  • (2) 10 Ton Porta Powers - good
  • Craftsman Table Saw – good
  • Summit 4ft/12in Radial Arm Drill, runs 240, 3 phase, - runs great
  • Bolt Bins full of standard thread bolts & nuts
  • A 6 Shelf Unit w/ fine thread bolts & nuts
  • Rebar Shear
  • Metal Cutting Ban Saw, model 916, 230 V, Phase 1, 27X3265 blade
  • Bearing Pullers
  • Gear Pullers
  • Fine Mag Drill w/ set of core bits & extendable neck
  • 20 Ton Air/ or Hyd. Shop Press
  • Assortment of Elec. Grinders: 4” to 6”
  • Heavy Metal Shop Table, 67” x 51”, w/ pipe vice & 6” Wilton shop vice
  • Homemade double metal break table, 126” x 62”
  • (2) Ridgid 535 Pipe Threaders, ฝ” to 2” pipe
  • *Ridgid 1234 Pipe Threader, ฝ” to 4” pipe
  • Ridgid Pipe Vice Stand (450)
  • Assorted Pipe Clamps: 2,3, & 4 in.
  • Tool Shop 16 sp. Drill Press
  • Battery Operated Work Lamp
  • Stainless Steel Wash Bin on Wheels
  • Multiple Metal Shelving Units
  • Several Socket Sets, Wrench Sets, Tap & Die Sets
  • Neiko 16 sp. Drill Press
  • Porter Cable Chop Saw, 14”
  • Ind. 6” Tool Grinder w/ ฝ H.P.
  • Milwaukee Porta-Band Saw
  • Various Dewalt Elec. & Portable Hand Tools
  • Assortment of Aluminum Ladders
  • Gaip 20 gallon Parts Washer

Misc.:

  • Fire Eye Boiler Components, valves etc.
  • Assorted Elec. Motors - new
  • Dry Wall Jack Stand, 11ft
  • Commercial Elec. Fryer, model FFG-B - works good
  • Pick Box Freezer - runs good
  • Ice-O-Matic Ice Maker, model 0500FT5 - good
  • Several Walk-in Cooler Compressor units
  • 2010 Bobcat 76” Tiller, low Hrs. good condt.
  • Simoneau Boiler w/ Gordon Piatt Burner, uses #2 fuel, 100 H.P. - working condt.
  • Knapheid 13ft Service Box, 74” inside height - good condt.
  • Assortment of Lumber: 2x8, 2x6, 2x4
  • Misc. Oak 1”, 2” & 2 ฝ” Planks - various lengths
  • Trash Pumps
  • (2) Big Jon down riggers
  • (4) Tires: 285-60 R 20, @ 90%
  • Cummins Eng. NTC 300
  • Van Guard 16 H.P. V-Twin Eng. - New
  • Safety cones
  • Assortment of Shovels
  • Assortment of Automotive Fluid
  • (2) Rubber Horse Troughs, oval
  • 3 Aluminum step
  • Pallet of Insulation Floor Forms w/channels
  • Various Sump Pumps
  • (4) water Pumps - good
  • 1984 Lattner Gas - Fired Boiler, uses natural gas, Rated H.P.- 25, 268 Sq. Ft. Heating surface, 863 lbs. steam/hr.
  • Man Basket, 4 x 8
  • Tank, approx. 300 gal, on skids, used to hold waste oil
  • Tank, approx. 2000 gal, used to hold waste oil - good
  • Disassembled Boe-Flex Machine

Iron:

  • (100+) Metal Sheeting, various size & thickness
  • Lots of Scrap Iron
  • Multiple Flue Boiler Pipe, assorted length & diameter
  • Schedule 80 Pipe
  • Rebar

Electrical, Plumbing, Heating & Air Supplies/Components:

  • Many various Elec. Components
  • Conduit Pipe - EMT
  • Carlon Elec Conduit
  • Conduit bender, ฝ”, พ” & 1”
  • Multiple Conduit fittings, up to 4”
  • Pex Fittings
  • (4) rolls of Coil-PAK 12 gauge wire
  • (20) Light Fixtures, explosion proof
  • Many Breaker Boxes, 100 & 125 - new
  • 80 Gal State Elec Water Heater, new in box
  • Assortment of H2O meter valves
  • Assorted PVC pipe
  • Steam Taps
  • Valve Taps
  • Expansion Valves
  • Large assortment of duct work, round & rectangular
  • Robin air Refrigeration. Recovery System, model 17660
  • Assorted incomplete copper refrigerator line sets
  • Assortment of refrigeration filter dryers & cold controls
  • Refrigeration Vacuum Pump
  • Assorted Refrigerant in-tanks
  • Neumatic Thermostatic control valves
  • Blower Motors

Seller: J.OB's Specialties John O'Brien (701) 290-4076

*Auctioneers Note: This is a Retirement Auction! John worked in the Oil Field Industry for decades and is selling his business out.
Proxidbid Items will start selling at Noon.

We may be running 2 auction rings due to the large listing, be prepared to split up.

Lots of Specialty Items, too many to list.

 

Click on photos to enlarge

       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
   
       
       

Click on photos to enlarge


Shane Wolff  
Lic. #326 
701-983-4573 
701-870-9090 (Cell)

Paula Jo Wanner
Clerk
701-870-1406

 

Armon Wolff   

 
Adam Wanner
Lic. #908
701-983-4521
Pat Willson
Secretary
701-870-2147 (cell)

 

Hit Counter

back to auctions


Home | Auctions | Special Consignments | About Us | Contact | Online Auctions | Sold (Auction Results)


Wolff Auctioneers

Shane: 701-983-4573 - Lic. #326
Paula Jo: 701-870-1406 - Lic. #664
Adam Wanner:  701-983-4521 - Lic #908
Abe Dillman - Western ND Area Rep.: 701-955-8587 - Lic. #1064

Wolff Auctioneers
1460 County Rd. 5
Golden Valley, ND  58541-9616

Email:  wolffclerking@gmail.com

 

www.wolffauctioneers.com

x